Disposal of Old Equipment
Only for European Union and countries with recycling systems
This symbol on the products, packaging, and/or accompanying documents means that used
electrical and electronic products must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable
collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment. For more information about
collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
<Only for models with an external antenna connector>
External antenna
Wireless WAN external antenna and feeder cable shall be chosen so that the overall gain is 1.4 dBi or less
at the 698 - 960 MHz frequency range and is 4.1 dBi or less at the 1710 - 2700 MHz frequency range. Use
of wireless WAN external antenna and feeder cable with a higher overall gain can lead to the device being
non-compliant with European standards and the Radio Equipment Directive.
Users must maintain a minimum of 20 cm spacing between the external antenna and all people (excluding
extremities) during wireless modes of operation.
For Australia, New Zealand models
<Only for models with an external antenna connector>
External antenna
Wireless WAN external antenna and feeder cable shall be chosen so that the overall gain is 1.4 dBi or less
at the 698 - 960 MHz frequency range and is 4.1 dBi or less at the 1710 - 2700 MHz frequency range.
Users must maintain a minimum of 20 cm spacing between the external antenna and all people (excluding
extremities) during wireless modes of operation.
72
Operating Instructions - Reference Manual
Appendix
