•
Inserting the unit in the reverse direction may damage the headset terminal cover.
3.
Attach the belt of the hand strap part.
•
Pass the belt through the ring (
G
), adjust the hand strap to fit on your hand, fold back and fasten
the belt (
H
), and then fold the cover (
I
).
•
Make sure that the ring does not go past the stopper (
J
). If it does, the belt may get detached from
the ring and the unit may fall.
4.
Attach the shoulder strap.
•
You can hang the unit horizontally or vertically.
•
Pass the strap through the rings as shown in the figure (
K
), pass it through the buckles (
L
), and
then adjust it to the desired length.
Operating Instructions - Reference Manual
59
Supplementary items
