5.
Attach the buckles (
E
), and adjust the buckle belts so that the hand strap is not loose (
F
).
•
Insert the buckles until you hear a click.
6.
Open the cover, adjust the hand strap to fit your hand, fold back and fasten the belt, and then fold the
cover.
•
Make sure that the ring does not go past the stopper (
G
). If it does, the belt may get detached from
the ring and the unit may fall.
Replacing the battery
To replace the battery, detach the buckles.
Attaching the shoulder strap
After step 3 above, attach the shoulder strap to the rings of the hand strap.
•
You can hang the unit horizontally or vertically.
•
Pass the strap through the rings as shown in the figure (
A
), pass it through the buckles (
B
), and then
adjust it to the desired length.
56
Operating Instructions - Reference Manual
Supplementary items
