Panasonic FP2 ET-LAN, Техническое руководство

Страница: 62 / 306

5-14
Address Name
Default
value
Setting value and explanation
235H Router 1 network (subnetwork) address (L) 0000H
[Set value] Network (sub-network) address
of destination node
- This specifies the network (sub-network)
address for an adjacent network
connected through the router.
- 00000000H and FFFFFFFFH will cause
errors to occur.
236H Router 1 network (subnetwork) address (H) 0000H
237H Router 1 Router IP address (L) 0000H
[Set value] Router IP address
- The network (sub-network) address for
the router address must be identical to
the network (sub-network) address for the
source node IP address. If they are
different, an error will occur.
- 00000000H and FFFFFFFFH will cause
errors to occur.
238H Router 1 Router IP address (H) 0000H
239H
Router 2
Network (subnetwork) address (L)
0000H
Refer to the above “addresses 235H to
238H”.
23AH Network (subnetwork) address (H)
23BH Router IP address (L)
23CH Router IP address (H)
23DH
Router 3
Network (subnetwork) address (L)
0000H
23EH Network (subnetwork) address (H)
23FH Router IP address (L)
240H Router IP address (H)
241H
Router 4
Network (subnetwork) address (L)
0000H
242H Network (subnetwork) address (H)
243H Router IP address (L)
244H Router IP address (H)
245H
Router 5
Network (subnetwork) address (L)
0000H
246H Network (subnetwork) address (H)
247H Router IP address (L)
248H Router IP address (H)
249H
Reserved (Used by the system.)
If any value is written to these, it should be 0000H.
24AH
24BH
24CH
24DH
24EH
24FH