Panasonic FP2 ET-LAN, Техническое руководство

Страница: 284 / 306

15-22
Request signal area (Bank: 0) Expanded request signal area (Bank: 0)
Address Description Address Description
36
8
H
bit 0 Receive request signal (Connection 1)
36
C
H
bit 0 Receive request signal (Connection 1)
bit 1 bit 1
bit 2 Send request signal (Connection 1) bit 2 Send request signal (Connection 1)
bit 3 bit 3
bit 4 Receive request signal (Connection 2) bit 4 Receive request signal (Connection 2)
bit 5 bit 5
bit 6 Send request signal (Connection 2) bit 6 Send request signal (Connection 2)
bit 7 bit 7
bit 8 Receive request signal (Connection 3) bit 8 Receive request signal (Connection 3)
bit 9 bit 9
bit A Send request signal (Connection 3) bit A Send request signal (Connection 3)
bit B bit B
bit C Initialization request signal bit C Receive request signal (Connection 4)
bit D bit D
bit E ERR. LED flash off signal
Note)
bit E Send request signal (Connection 4)
bit F Error log notified request signal bit F
36
9
H
bit 0 Open request signal (Connection 1)
36
D
H
bit 0 Receive request signal (Connection 5)
bit 1 bit 1
bit 2 Open request signal (Connection 2) bit 2 Send request signal (Connection 5)
bit 3 bit 3
bit 4 Open request signal (Connection 3) bit 4 Receive request signal (Connection 6)
bit 5 bit 5
bit 6 Open request signal (Connection 4) bit 6 Send request signal (Connection 6)
bit 7 bit 7
bit 8 Open request signal (Connection 5) bit 8 Receive request signal (Connection 7)
bit 9 bit 9
bit A Open request signal (Connection 6) bit A Send request signal (Connection 7)
bit B bit B
bit C Open request signal (Connection 7) bit C Receive request signal (Connection 8)
bit D bit D
bit E Open request signal (Connection 8) bit E Send request signal (Connection 8)
bit F bit F
36
A
H
bit 0 E-mail receive request signal
bit 1
bit 2 E-mail send request signal
bit 3
bit 4 E-mail log notified request signal
bit 5 E-mail error log notified request signal
bit 6
to
bit F Reserved
Note:
-
The same signal (e.g. 360H bit 0 and 364H bit 0 Receive notified signal (Connection 1) ) can be used
in both the signal complete area and the expanded complete signal area. It does not matter which
signal is used in which area.
-
If the ERR. LED flash off signal (368H bit E) is turned ON, flashing of the LEDs for E1 and E2 turns off.
Also, while the ERR.LED flashing off signal (368H bit E) is ON, the LEDs for E1 and E2 will not flash
even if a recoverable error or a warning error occurs. However, these functions are not affected by
error log processing, so the error contents remain in the log.