Panasonic FP2 ET-LAN, Техническое руководство

Страница: 279 / 306

15-17
Ladder send e-mail setting area (Bank: 10H)
Address Name Default Set value/Explanation
000H Destination address 1
(For “To”)
(Address Nos. 1 to 17) 0000H [Default] 0 to FFFFH
Nos. of the destination addresses (for “To”, “Cc”, and “Bcc”)
which are registered in the Address Book by means of
Configurator ET can be specified. In this process, bit data is
used.
Example:
When sending e-mails to the Nos. 1 and 6 addresses registered
in the Address Book:
Destination address 1 (For “To”, Address: 000H)
- To send e-mails using the ladder program, set the default to
the value other than “0H” for either Destination address 1 (For
“To”) or Destination address 2 (For “To”).
- This setting is not required for the destination addresses “Cc”
and “Bcc”.
001H Destination address 2
(For “To”)
(Address Nos. 17 to 32) 0000H
002H Destination address1
(For “Cc”)
(Address Nos. 1 to 16) 0000H
003H Destination address 2
(For “Cc”)
(Address Nos. 17 to 32) 0000H
004H Destination address 1
(For “Bcc”)
(Address Nos. 1 to 16) 0000H
005H Destination address 2
(For “Bcc”)
(Address Nos. 17 to 32) 0000H
006H Message No.
0000H [Default] 0H
[Set value] 1H to the numbers that are registered as e-mail
messages using Configurator ET
- The e-mail message that you wish to send using the ladder
program is specified.
- The e-mail message No. registered using Configurator ET is
specified.
007H Signature No.
0000H [Default] 0H
[Set value] 0 to 5H
- The signature which is attached to the e-mail message using
the ladder program is specified.
- The fixed signature is determined as No. 5. Other signatures
than the fixed one registered using Configurator ET are
determined as Nos.1, 2, 3, and 4 from the first one. When “0”
is specified, a signature is not attached to the e-mail.
008H Reserved (Used in the system.)
If necessary, write “0000H”.
009H
00AH
00BH
00CH
00DH
00EH
00FH