Panasonic FP2 ET-LAN Скачать руководство пользователя страница 195

Страница: 195 / 306

11-27

11.10.4 E-mail Status Area

When the e-mail function is used, it can be checked that the ET-LAN unit normally sends/receives e-
mails by means of the e-mail status area.

After checking the e-mail status area:

If the status is found to be as noted below, check the e-mail settings and re-set them if necessary.

The e-mail send conditions set for the ET-LAN unit are met, but the number of e-mail send complete

times and the number of e-mail send error are not counted.

The e-mail receive conditions set for the ET-LAN unit are met, but the number of e-mail receive check

times and the number of e-mail receive error are not counted.

If the status is found to be as noted below, contact the network administrator.

The number of e-mail send complete times is counted, but the e-mail is not sent to the recipient.

The number of e-mail receive check times is counted when an-email is sent to the ET-LAN unit, but the

number of e-mail receive complete times and the number of e-mail receive error are not counted.

- E-mail status area (Bank: 10H)

Address

Name

Description

080H

Number of e-mail
send complete
times

Stored value: 0-FFFFH

▪

The number of times that e-mails have been sent normally is stored.

▪

The value is reset to “0” when the initialization processing is executed or

the e-mail setting is changed.

081H

Number of e-mail
send error

Stored value: 0-FFFFH

▪

The number of times that e-mails have not been sent normally is stored.

▪

The value is reset to “0” when the initialization processing is executed or

the e-mail setting is changed.

082H

E-mail re-send
status

Stored value: 0-FFFFH

▪

E-mail re-send status

▪

“1” is stored when the e-mail re-send processing is being executed. When

the re-send processing is completed, “0” is stored.

083H

｜

087H

Reserved (Used in the system.)

088H

Number of e-mail
receive check
times

Stored value: 0-FFFFH

▪

The number of times that e-mails in the e-mail server are checked is stored.

▪

The value is reset to “0” when the initialization processing is executed or

the e-mail setting is changed.

089H

Number of e-mail
receive check error

Stored value: 0-FFFFH

▪

The number of times that the e-mail check is not completed successfully is

stored.

▪

The value is reset to “0” when the initialization processing is executed or

the e-mail setting is changed.

08AH

Number of e-mail
receive complete
times

Stored value:

0-FFFFH

▪

The number of times that e-mails are received is stored.

▪

The value is reset to “0” when the initialization processing is executed or

the e-mail setting is changed.

08BH

Number of e-mail
receive error

Stored value: 0-FFFFH

▪

The number of errors occurred when e-mails are received is stored. (The

errors include the ones occurred in Mail Filter and Request Mail Password
check processing.)

▪

The value is reset to “0” when the initialization processing is executed or

the e-mail setting is changed.

08CH
|
08FH

Reserved (Used in the system.)

Содержание FP2 ET-LAN



















































































































































































































































































































Результаты поиска

Содержание FP2 ET-LAN

Отзывы:

Бренды по названию

Популярные бренды

Panasonic FP2 ET-LAN, Техническое руководство

Результаты поиска

Содержание FP2 ET-LAN

Отзывы:

Бренды по названию

Популярные бренды