ENGLISH-11
Preparation (continued)
Moving the Lens to the Home Position
z
When using PT-RCQ10 / PT-RCQ80 / PT-RZ120
When aligning the orientation of the projected image and moving the lens to the home
position, perform the operation with the following procedure.
1) Turn on the projector to start
the projection.
z
The top, bottom, left, and right of the
projected image will be inverted until
you perform step 5).
2) Press the <MENU> button to
display the [MAIN MENU] screen.
3) Select [PROJECTOR SETUP] in
the main menu and then press
the <ENTER> button.
4) Select [LENS] in the [PROJECTOR
SETUP] menu and then press the
<ENTER> button.
z
The [LENS] screen appears.
5) Select [LENS TYPE] on the [LENS]
screen and then use the ◄►
buttons to select [ET-DLE020].
z
Each press of the
◄►
buttons switch-
es the item to [NORMAL],
[ET-DLE035] or [ET-DLE020].
6) Select [LENS HOME POSITION]
on the [LENS] screen and then
press the <ENTER> button.
z
A confirmation screen appears.
7) Use the
◄►
buttons to select
[OK] and then press the
<ENTER> button.
z
[PROGRESS] is displayed on the
[HOME POSITION] screen and the
lens moves to the home position for
the ET-DLE020.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
1/2
1/2
MENU SELECT
SUB MENU
PROJECTOR SETUP
PROJECTOR ID
ALL
PROJECTION METHOD
LENS
OPERATION SETTING
NORMAL
LIGHT OUTPUT
100.0%
BRIGHTNESS CONTROL
AUTO
STANDBY MODE
NORMAL
QUICK STARTUP
OFF
NO SIGNAL SHUT-OFF
DISABLE
NO SIGNAL LIGHTS-OUT
DISABLE
ENTER
MENU SELECT
CHANGE
LENS
LENS TYPE
ET-DLE020
LENS HOME POSITION
LENS CALIBRATION
Note
z
If [LENS TYPE] is incorrectly set to other than [ET-DLE020], the lens will not move to the
correct home position.
