12-ENGLISH
Preparation (continued)
z
When using one of PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 /
PT-RW730 / PT-RZ660 / PT-RW620
When aligning the orientation of the projected image and moving the lens to the home
position, perform the operation with the following procedure.
1) Turn on the projector to start
the projection.
z
The top, bottom, left, and right of the
projected image will be inverted until
you perform step 4).
2) Press the <SHIFT> button on
the remote control.
z
The shift adjustment screen appears.
3) Press the <DEFAULT> button
on the remote control while
the shift adjustment screen is
displayed.
z
The [HOME POSITION] screen ap
-
pears.
4) Use the
◄►
buttons to select
[ET-DLE020].
z
Each press of the
◄►
buttons switch-
es the item to [NORMAL],
[ET-DLE030] or [ET-DLE020].
5) Press the <ENTER> button.
z
[PROGRESS] is displayed on the
[HOME POSITION] screen and the
lens moves to the home position for
the ET-DLE020.
HOME POSITION
ADJUST
DEFAULT
LENS
SHIFT
VERTICAL POSITION
HORIZONTAL POSITION
LENS
CANCEL
MENU
ENTER
CHANGE
EXECUTE
HOME POSITION
ET-DLE020
Note
z
If [HOME POSITION] is incorrectly set to other than [ET-DLE020], the lens will not move
to the correct home position.
