EN18
Assembly
(
Continued
)
5
Turn on the power and raise the backrest to the upright position.
Insert the power plug into the
power outlet.
●
Always be sure to insert into an AC
120 V plug.
Fasten the controller
cord using the clip.
●
Fasten so the cable under
the clip will not sag too
much with the backrest
raised.
(Because there is a chance
of the cord becoming
tangled with your feet,
etc.)
Placing the controller
into the controller
stand.
Confirm the lock switch key
is set to the
“
open
”
position.
Confirm the power switch is
set to the
“
on
”
position.
Press
on the controller twice.
●
Press once, and then press again approx. 1 second later.
Backrest will rise automatically.
●
❶
●
❷
●
❶
●
❶
●
❷
●
❷
●
❶
●
❸
●
❷
●
❸
●
❹
6
Placing the controller