How to Use
EN31
Delete is completed
once the flashing stops.
To start the registered program
Press
to turn on the
power.
（
When not massaging, the power is turned off automatically
if 3 minutes or more pass without operation.
）
Select and press one of the
automatic courses that is
registered using the USER
button.
(Example:
“
SWEDISH
”
)
Select one of the USER
buttons that is registered.
●
Registered USER button will light. (Example:
)
Massage with registered setting will start after the body scanning.
●
When an unregistered course is selected, the standard automatic course massage is applied.
However, the
“
Heat
”
massage heads on/off settings,
“
Foot Heat
”
on/off settings, temperature
settings and volume settings registered to the USER button are applied. (See page EN30.)
◦
❶
To delete the registered settings
(Example:
)
Press.
Press and hold for
more than 3 seconds.
Press.
Press.
◦
❷
Press
to turn on
the power. Press the
button you want to
delete.
Press again
during the button
flashes (about
10 seconds).
Press again and
hold for more than
3 seconds until the
button changes to
flashing.
●
❶
●
❸
●
❷
◦
❸
