Befor
e Use
EN19
Fasten the pillow using
the fasteners.
●
See page EN23 for guidelines
on positioning the pillow
during the massage.
Fasten the comfort cushion using
the zipper.
●
❶
●
❷
7
Pillow
Fasteners
Fasteners
Zipper
Comfort cushion
Fasten to the right side
Leg rest
View from
front
Fastening band
Tab
Controller cord
Controller cord
Cord-holder groove
③
③
④
②
●
⑤
●
⑥
When the controller stand is attached on the left side
●
Run the controller cord to the left.
①
Press
on the controller to turn on the power.
②
Press
on the controller and hold until the leg rest has
risen as far as it will go.
・
Continue pressing until a
“
beep-beep-beep
”
sound is heard.
③
Disconnect the controller cord.
・
Hook is released by pressing on the tab on the fastening
band with your fingers.
④
Move the controller cord under the leg rest to the left side.
⑤
Fasten the controller cord.
・
Press down from the edge if it does not fit in easily.
⑥
Insert the tip of the fastening band into the hole.
●
The controller cord is fastened to the right side prior to
leaving the factory.
Fasten the pillow and the comfort cushion.