Panasonic DP-MB251CX, Руководство по эксплуатации

Страница: 72 / 152

Feature Code Selection
LCD display
contrast #145 To change the LCD display contrast.
M 1 N “
-2
”
M 2 N “
-1
”
M 3 N “
0
” (default)
M 4 N “
1
”
M 5 N “
2
”
Scale selection #147 The selected scale will be used when measurements are shown on the unit’s
display.
M 1 N “
MILLIMETRES
” (default)
M 2 N “
INCHES
”
Display interval #148 To set display interval for messages showed alternately.
M 1 N “
1sec
” (default)
M 2 N “
2sec
”
M 3 N “
3sec
”
M 4 N “ 4sec ”
M 5 N “
5sec
”
Administrator
code #151 To change the administrator code for mode restriction settings.
1. M MENU N A MBNM 1 NM 5 NM 1 N A M SET N
2. Enter the current administrator code. A M SET N
R The default administrator code is “
0000
” .
3. Enter a new 4-digit administrator code using 0-9. A M SET N
4. Enter the new administrator code again. A M SET N A M MENU N
Note:
R It is recommended that you change this administrator code from the default
administrator code.
Mode restriction #154 To activate the mode restriction. See page 102 for details.
Change password #155 To change the password for feature programming via remote operation.
1. M MENU N A MBNM 1 NM 5 NM 5 N A M SET N
2. Enter the current password. A M SET N
R The default password is “
1234
” .
3. Enter a new 4-digit password using 0-9. A M SET N
4. Enter the new password again. A M SET N A M MENU N
Note:
R It is recommended that you change this password from the default password.
R This password is also used for feature programming via a web browser.
Maintenance time #158 The unit will automatically activate for self-maintenance.
1. M MENU N A MBNM 1 NM 5 NM 8 N A M SET N
2. Enter the maintenance start time.
R The default time is “
00:00
” .
R If you selected 12-hour time entry (page 22), press MGN repeatedly to
select AM or PM.
R If you selected 24-hour time entry (page 22), the time is set using 24-hour
time entry.
3. M SET N A M MENU N
Note:
R Do not activate the unit during self-maintenance.
72
12. Programmable Features