Panasonic DP-MB251CX, Руководство по эксплуатации

Страница: 47 / 152

– Long edge
– Short edge
R The following size recording paper (plain and thin)
can be used.
– A4
– Letter
– Legal
– F4/Folio/Foolscap (216
´
330 mm)
– Mexico Oficio/India Legal (216
´
340 mm)
– Custom size paper (feature #391 on page 76
and feature #392 on page 76)
R A6, B6 (ISO) and B6 (JIS) size paper is not supported
when copying 2-sided originals.
To make 1-sided originals into 2-sided copies
1. Set the original (page 35).
2. Press M DUPLEX N , and press MCN or MDN repeatedly to
select “
1SIDE/2SIDE
” . A M SET N
3. Press MCN or MDN repeatedly to select the desired
binding setting for copies.
–
“
LONG EDGE
”
– “
SHORT EDGE
”
4. M SET N
5. If necessary, enter the number of copies (up to 99).
6. When using the scanner glass:
1. MxN
R
The unit will scan 1 page.
2. Place the next document on the scanner glass
and press
M SET N .
R The unit will start copying.
When using the automatic document feeder:
MxN
7. After you finish copying, press MwN to reset this
feature.
Note:
R 2-sided copy is not available for the quick ID copy
feature (page 48), image repeat feature
(page 48) or poster feature (page 49).
R You can save the previous duplex setting (feature
#470 on page 83).
To make 2-sided originals into 1-sided copies
1. Set the original in the automatic document feeder
(page 35).
2. Press M DUPLEX N , and press MCN or MDN repeatedly to
select “
2SIDE/1SIDE
” . A M SET N
3. Press MCN or MDN repeatedly to select the type of
originals.
–
“
LONG EDGE
”
– “
SHORT EDGE
”
4. M SET N
5. If necessary, enter the number of copies (up to 99).
6. MxN
7. After you finish copying, press MwN to reset this
feature.
To make 2-sided originals into 2-sided copies
1. Set the original in the automatic document feeder
(page 35).
2. Press M DUPLEX N , and press MCN or MDN repeatedly to
select “
2SIDE/2SIDE
” . A M SET N
3. Press MCN or MDN repeatedly to select the type of
originals.
–
“
LONG
E
LONG
”
– “
LONG
E
SHORT
”
– “
SHORT
E
LONG
”
– “
SHORT
E
SHORT
”
4. M SET N
5. If necessary, enter the number of copies (up to 99).
6. MxN
7. After you finish copying, press MwN to reset this
feature.
Note:
R You can save the previous duplex setting (feature
#470 on page 83).
7.2.3 Collate copy
The unit can collate multiple copies in the same order as
the original document pages.
47
7. Copier