Panasonic DP-8032, Руководство по обслуживанию

Страница: 205 / 397

205
DP-8032/8025
2008 Ver. 1.2
068 NYSE Fax
Forward
(USA and
Canada Only)
1 = Off
2 = On Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax
Forwarding via Fax Parameter 054 is
automatically disabled, an Access Code of
"0000" is automatically assigned and Fax
Parameter 038 has a new setting added called
"NYSE".
069 NYSE Local
Print
(USA and
Canada Only)
1 = Inc
2 = On (Always) Selects the printing condition for the incoming faxes
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON : Always prints.
070 Line Error 1 = 128 lines
2 = 256 lines
3 = 512 lines
4 = 1024 lines
5 = 2048 lines
6 = Off
(will not disconnect line) 1. Selects the line disconnect condition during
reception. If the number of line errors exceed this
setting, the unit will disconnect the line.
2. Selects the transmit condition of RTP/PIP or
RTN/PIN.
(Available if No.73 Error Detect is set to "LINES")
(
See Note 1 )
071 Total Error 1 = 5%
2 = 10%
3 = 15%
4 = 20% Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No.73 Error Detect is set to "RATE".)
(
See Note 2 )
072 Continuous
Error
1 = Off (unlimited)
2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD Selects the continuous total error criteria of Off/3/6
or 12 lines in Standard mode. If continuous total
error exceeds this setting, the unit will transmit RTN/
PIN.
(Available if No.73 Error Detect is set to "RATE".)
073 Error Detect 1 = Lines
2 = Rate Selects the error detect condition Lines/Rate.
074 RTN Receive 1 = Disconnect
2 = Continue Selects whether to disconnect the phone line or
continue when "RTN" is received.
075 Coding 1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR
(MH, MR or MMR)
4 = JBIG Selects the coding scheme.
076 Batch TX
(USA and
Canada Only)
1 = Off
2 = On Selects whether the batch transmission is available.
077 RX JAM Length 1 = Off (unlimited)
2 = 2 m
Selects the maximum length of a received
document that can be printed.
078
~
079
Not Used
080 Original Lead
Edge ADF
-99
~
+99 Adjusts the distance between the scanning sensor
ON position and the scanning start position.
081 Original Tail
Edge ADF
-127
~
+127 Adjusts the distance between the scanning sensor
OFF position and the scanning end position.
Function Parameter Table
No. Parameter Selections Function