manualshive.com logo in svg

Panasonic DP-8032, Руководство по обслуживанию

На нашем сайте вы можете бесплатно скачать сервисный мануал для принтера Panasonic DP-8032. Этот удобный документ содержит все необходимые инструкции по обслуживанию и эксплуатации устройства. Скачайте его сейчас с manualshive.com и получите подробные руководства по использованию вашего принтера.

Поделиться
Скачать
background image

104

DP-8032/8025

 2008

Ver.1.2

3. Input the password, and select the 

“OK”

 button to enter the Service Mode (default password is 

00000000

).

4. Perform the Service Mode F1-06 (Print Test Pattern 4).
5. Check the gap of the print pattern from the paper edge. (Refer to the “3.8.2. <Figure>”)
6. Perform the Service Mode F6-16 (ADU Side Adjust), to adjust the gap to be 5 mm.
7. If the gap is less than 5 mm, input a (+) value. If more than 5 mm, input a (-) value.
8. Press the 

“STOP”

 key first, then press the 

“FUNCTION”

, and 

“C (CLEAR)”

 keys simultaneously to 

exit the Service Mode.

3.8.4.

100% Read Adjustment

1. Place the Original Document on the Platen Scanner.
2. Insert Ledger or A3 size paper into the 1st tray and change the tray setting to the appropriate paper 

size. Empty or pull out all the remaining trays (including the bypass tray) to disable them.

3. Press the 

“FUNCTION”

, 

“ORIGINAL SIZE (LEDGER/A3)”

, and the 

“3”

 keys simultaneously.

4. Input the password, and select the 

“OK”

 button to enter the Service Mode (default password is 

00000000

).

5. Perform the Service Mode F2 (Single Copy Test).
6. Check the Image size of the Copy and the Original as Portrait.
7. Perform the Service Mode F6-00 (Adj 100% Side-Side Read), to adjust the Side to Side to be the 

same.

8. If the image is smaller than the Original, input a (+) value. If bigger than the Original, input a (-) value.
9. Perform the Service Mode F6-01 (Adj 100% Lead-Tail Read), to adjust the Top to End to be the same.

10. If the image is smaller than the Original, input a (+) value. If bigger than the Original, input a (-) value.

11. Press the 

“STOP”

 key first, then press the 

“FUNCTION”

, and 

“C (CLEAR)”

 keys simultaneously to 

exit the Service Mode.

Note:

This is the size adjustment and do not worry about the positioning.

3.8.5.

Original Registration & CCD Read Adjustments

1. Place the Original Document on the Platen Scanner.
2. Insert Ledger or A3 size paper into the 1st tray and change the tray setting to the appropriate paper 

size. Empty or pull out all the remaining trays (including the bypass tray) to disable them.

3. Press the 

“FUNCTION”

, 

“ORIGINAL SIZE (LEDGER/A3)”

, and the 

“3”

 keys simultaneously.

4. Input the password, and select the 

“OK”

 button to enter the Service Mode (default password is 

00000000

).

5. Perform the Service Mode F2 (Single Copy Test).
6. Check the Image size of the Copy and the Original as Portrait.
7. Perform the Service Mode F6-03 (Original Registration), to adjust the Original Registration.
8. If the gap is smaller than the Original, input a (-) value. If bigger than the Original, input a (+) value.
9. Perform the Service Mode F6-53 (P Mode Image Density), to adjust the CCD Read for the side 

position.

10. If the gap is smaller than the Original, input a (+) value. If bigger than the Original, input a (-) value.

11. Press the 

“STOP”

 key first, then press the 

“FUNCTION”

, and 

“C (CLEAR)”

 keys simultaneously to 

exit the Service Mode.

3.8.6.

ADF 100% Image 1-Sided Adjustment

1. Place the Original Document on the ADF.
2. Insert Ledger or A3 size paper into the 1st tray and change the tray setting to the appropriate paper 

size. Empty or pull out all the remaining trays (including the bypass tray) to disable them.

3. Press the 

“FUNCTION”

, 

“ORIGINAL SIZE (LEDGER/A3)”

, and the 

“3”

 keys simultaneously.

4. Input the password, and select the 

“OK”

 button to enter the Service Mode (default password is 

00000000

).

Содержание DP-8032














































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DP-8032

NCR 7156 Operating And Troubleshooting Manual preview
7156
Бренд: NCR Страницы: 36
NCR 7156 Service Manual preview
7156
Бренд: NCR Страницы: 206
NCR 7156 Owner'S Manual preview
7156
Бренд: NCR Страницы: 138
GCC Technologies Elite 12N Network Manual preview
Elite 12N
Бренд: GCC Technologies Страницы: 63
GCC Technologies Elite XL-1208 Supplementary Manual preview
Elite XL-1208
Бренд: GCC Technologies Страницы: 9
GCC Technologies Elite XL User Manual preview
Elite XL
Бренд: GCC Technologies Страницы: 199
Xerox DocuColor 6060 Recommended Materials List preview
DocuColor 6060
Бренд: Xerox Страницы: 4
Lexmark 7016-630 Service Manual preview
7016-630
Бренд: Lexmark Страницы: 455
Lanier GX3050 User Manual preview
GX3050
Бренд: Lanier Страницы: 265
Lanier LD225 Function Manual preview
LD225
Бренд: Lanier Страницы: 138
Lanier LD225 Fax Manual preview
LD225
Бренд: Lanier Страницы: 236
Canon Pixma TS7700i Series Manual preview
Pixma TS7700i Series
Бренд: Canon Страницы: 554
Ricoh SP150 series Setup Manual preview
SP150 series
Бренд: Ricoh Страницы: 2
A&D AD-8120 Instruction Manual preview
AD-8120
Бренд: A&D Страницы: 32
Mitsubishi TDP-459 User Manual preview
TDP-459
Бренд: Mitsubishi Страницы: 86
Mitsubishi CP-9500DW Features And Specifications preview
CP-9500DW
Бренд: Mitsubishi Страницы: 2
Citizen CT-D101 User Manual preview
CT-D101
Бренд: Citizen Страницы: 57
CognitiveTPG Blaster ADVANTAGE User Manual preview
Blaster ADVANTAGE
Бренд: CognitiveTPG Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды