Panasonic DP-1510P, Руководство по обслуживанию

Страница: 280 / 486

280
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
Note 1: Continuous Polling (Station Mode)
This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to “2:Station”. The last
Program Key will be assigned with the “Store 4 Poll” Key name automatically and cannot be
changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF or Platen and
then press the Program Key to store or add the document(s) into a polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will not
be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 4: The default setting of parameters depends on the country’s specifications or regulations. Print the
Function Parameter List to confirm the default settings.
135 JOB END
TIMER
1 sec.
~
999 sec. Selects the Guard Timer while printing data with the
PDL Printer Driver ver. 6.
136
~
159
Not Used
160 VERSION Indicates the ROM version
on the FRM PC Board. PDL Firmware version
161
~
199
Not Used
Signal
Setting
1:128 2:256 3:512 4:1024 5:2048 6:Off
MCF/PIP 0-31 0-63 0-127 0-255 0-511 Always
RTP/PIP 32-63 64-127 128-255 256-511 512-1023 -
RTN/PIN 64-127 128-255 256-511 512-1023 1024-2047 -
Signal
Setting
1:5% 2:10% 3:15% 4:20%
MCF/PIP 0-2 0-4 0-7 0-9
RTP/PIP 3-4 5-9 8-14 10-19
RTN/PIN 5- 10- 15- 20-
Function Parameter Table
No. Parameter Selections Function