Panasonic DP-1510P, Руководство по обслуживанию

Страница: 237 / 486

237
DP-1510P/1810P
/1810F/2010E
APR 2002
Edition 2.0
630 XMT or RCV
(Polling)
B Redial count over. No dial tone detected. Sensor dial tone
is not detected. (country dependent)
Busy tone is detected. (country
dependent) T1 timer (35±5 sec) elapsed
without a signal from the receiver.
631 XMT A "STOP" button was pressed during
Auto Dialing.
634 XMT Redial count over with no
response or busy tone was not
detected.
Note:
U.S.A. and Canadian models
will redial only once if a busy
tone is not detected.
638 XMT Power turned off with applicable
data in memory or during
communication. Power switched off. Power failure
occurred.
710 XMT
RCV LAN Command Response between
LANC/LANB PCB timed out. Defective LANC/LANB PCB.
712 XMT LAN Unknown email address replied
from the Mail Server. Mail Server received an incorrect email
address. (Dependent on Server's Mail
application)
713 XMT LAN Memory overflow in the LAN
Interface. The document data exceeded 1.6
Mbyte/page and cannot be sent.
714 XMT
RCV LAN LAN Interface error.
Cannot logon to the LAN. The 10Base-T/100Base-TX cable is not
connected.
An unexpected LAN problem occurred.
Check the LANC/LANB PCB connector.
715 XMT LAN TCP/IP connection timed out. Incorrect IP Address is set.
Verify the IP Address, Default Router IP
Address, SMTP Server IP Address.
716 XMT LAN Cannot logon to the LAN. Incorrect SMTP Server IP Address is
set.
No email application is activated on the
Mail Server.
717 XMT LAN Incomplete SMTP Protocol
transmission. Mail Server’s hard disk may be full.
Mail Server is defective.
718 XMT LAN Page Memory Overflow occurred
while receiving printing data. The
paper size selected within your
application to print is larger than
the paper size loaded in the
cassette(s). Check the document size and
resolution.
Ask originator to re-send in a supported
size and resolution.
719 RCV LAN Received data via LAN is in a
format that is not supported. Ask the originator to re-send with a
supported file attachment:
* In a TIFF-F format.
* Image data conforming to A4/Letter
size.
720 POP LAN Unable to connect with the POP
Server. Incorrect POP Server address is set.
POP Server is down.
721 POP LAN Unable to login to the POP Server. Incorrect User Name or Password is
set.
Fax Information Codes
Code Mode Phase Description of Problem Cause