Panasonic DP-1510P, Руководство по обслуживанию

Страница: 264 / 486

264
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
5.1.5. F6 Mode: Adjustment and Programming
Set the machine to Service Mode and press "6" on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Control Panel.
↓
If you wish to select another code number, scroll the menu with the arrow keys (
↑ ↓
).
↓
Select the desired function on the Control Panel and press the “START” key.
↓
When the “CANCEL” key is pressed, the selected setting inputted will not be accepted.
↓
Press the “FUNCTION” and “CLEAR” keys simultaneously to exit the Service Mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F6 Mode
No. Item Function Setting
00 Main-scan direction magnification
ratio (vertical position to the paper
feed direction) (standard = 100%) Adjustment of ratio for vertical position
when scan is made.
(+) : Increase.
(-) : Decrease. -9 - +9
0.1%
01 Sub-scan direction magnification
ratio (parallel position to the paper
feed direction) Adjustment of ratio for parallel position
when scan is made.
(+) : Increase.
(-) : Decrease. -9 - +9
0.1%
02 Platen original registration
detecting timing Adjustment of platen original registration
detection timing.
(+) : More delay.
(-) : Less delay. -30 - +30
0.2mm
03 Copy paper registration detecting
timing (1st Tray) Delay time is adjusted from registration
roller clutch ON.
(+) : More delay.
(-) : Less delay. -30 - +30
0.25mm
04 Copy paper registration detecting
timing (Sheet Bypass) Delay time is adjusted from registration
roller clutch ON.
(+) : More delay.
(-) : Less delay. -30 - +30
0.25mm
05 Copy paper registration detecting
timing (2nd Tray) Delay time is adjusted from registration
roller clutch ON.
(+) : More delay.
(-) : Less delay. -30 - +30
0.25mm
06 Copy paper registration detecting
timing (Auto. Duplex Unit) Delay time is adjusted from registration
roller clutch ON.
(+) : More delay.
(-) : Less delay. -30 - +30
0.25mm
07 Registration void of image Registration void should be adjusted.
(+) : Increase.
(-) : Decrease. 0 - +99
0.425mm