13
RQT7394
Ge
tt
in
g s
ta
rte
d
The unit begins trying various IR codes to see which one
communicates properly with your cable TV box. It’s quite
common for this phase of the setup to be repeated numerous
times.
–If the cable TV box has changed to channel 09, select “Yes” and
press [ENTER].
–If the cable TV box is still set to the same channel, select “No”
and press [ENTER]. Repeat this step until the cable TV box
changes to channel 09.
∫
The set contents are displayed together
–If the information is correct, select “Yes, end setup” and press
[ENTER].
–If the information is not correct, select “No, repeat setup
process” and press [ENTER] to start the setting again.
Once you confirm the input content, the following screen appears.
3
Press [ENTER].
A television reception screen or a blue background screen is
displayed.
If you do not want to use TV Guide On Screen
TM
system
➡
page 65, Auto channel/clock settings
4
Press [
Í
DVD POWER].
“BYE” appears briefly and then “12:00A” flashes on the
unit’s display. The unit is now in standby mode and ready to
download the channel line-up and the program listings.
Check the following again, so the downloading will not fail.
If you connect a cable TV box
≥
the output terminal of the cable TV box is connected to this
unit’s RF IN or IN3 (L3) terminal (
➡
page 8)
≥
the IR Blaster is correctly connected and installed
(
➡
page 8)
≥
the cable TV box is turned on
If you do not connect a cable TV box
≥
the antenna cable is connected to this unit’s RF IN terminal
5
Leave this unit in the standby mode.
It is strongly recommended that you wait at least 24 hours
before using the unit. No damage will occur if the unit is
used sooner, but the channel line-up and program listings
may not have been fully downloaded.
≥
If you connect a cable TV box, leave it switched on without
using it.
≥
With some cable TV boxes, the cable TV box remote
control can turn on and off both the cable TV box and the
television. Utilizing this feature (turning the cable TV box
off) will prevent the channel line-up from being
downloaded.
If you find “There is no data for this screen” displayed on the
television when you turn the unit on, the unit has not yet
downloaded the channel line-up.
This unit may download more than one channel line-up. Follow the
on-screen guidance and select one of these.
Set the clock manually.
Please note that the program list is not displayed until the unit
downloads it. Timer program recording is only possible manually.
1
Press [SETUP].
2
Press [
3
,
4
] to select “Set Up” and
press [
1
].
3
Press [
3
,
4
] to select “Manual Clock
Setting” and press [ENTER].
4
Press [
2
,
1
] to select the item you
want to change and press [
3
,
4
] to
change the setting.
5
Press [ENTER].
The clock starts.
6
Press [SETUP].
≥
DST (Daylight Saving Time): ON or OFF
If you select “ON”, the clock is advanced one hour starting at 2
a.m. on the first Sunday in April and ending at 2 a.m. on the last
Sunday in October.
≥
TIME ZONE shows the time difference from Greenwich
meantime (GMT).
EST (Eastern Standard Time)
l
GMT
j
5
CST (Central Standard Time)
l
GMT
j
6
MST (Mountain Standard Time)
l
GMT
j
7
PST (Pacific Standard Time)
l
GMT
j
8
AST (Alaska Standard Time)
l
GMT
j
9
HST (Hawaii Standard Time)
l
GMT
j
10
Is your cable box now tuned to channel 09?
Yes
No
Zip code - 11111 (USA)
Cable -
Yes
Cable box - No
What would you like to do now?
Watch TV
SORT
SCHEDULE
LISTINGS
There is no data
for this screen.
TODAY
Last
Channel
SORT
SCHEDULE
FAVORITES
RECORD
INFO.
87
NWGB
BOX
pTV
TV
NWBG
ducation
ANiMe
Network
PBS
LISTINGS
8:30PM
8:00PM
To use immediately (Manual Clock Setting)
In the United States, TV GUIDE and other related marks are
registered marks of Gemstar-TV Guide International, Inc. and/
or one of its affiliates. In Canada, TV GUIDE is a registered
mark of Transcontinental Inc., and is used under license by
Gemstar-TV Guide International, Inc. TV Guide On Screen,
G-LINK, VCR Plus
r
and PlusCode are registered marks of
Gemstar-TV Guide International and/or one of its affiliates.
The TV Guide On Screen and VCR Plus
r
systems are
manufactured under license from Gemstar-TV Guide
International, Inc. and/or one of its affiliates.
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/
OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY
LIABLE FOR THE ACCURACY OF THE PROGRAM
SCHEDULE INFORMATION PROVIDED BY THE TV
GUIDE ON SCREEN SYSTEM. IN NO EVENT SHALL
GEMSTAR- TV GUIDE INTERNATIONAL, INC. AND/
OR ITS RELATED AFFILIATES BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF PROFITS,
LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE PROVISION OR USE OF ANY
INFORMATION, EQUIPMENT, OR SERVICES
RELATING TO THE TV GUIDE ON SCREEN SYSTEM.
The TV Guide On Screen and VCR Plus
r
systems are
protected by one or more issued United States patents such as
6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713;
4,751,578; 4,706,121; 6,466,734; 6,430,359; 6,091,882;
6,049,652; 5,335,079; 5,307,173.
SETUP
Disc
Video
Audio
Di
l
Set Up
Manual Clock Setting
/
:
/
SAT
AM
MONTH
DAY
YEAR
HOUR
MINUTE
1
1
12
00
2000
DST
TIME ZONE
OFF
EST
Channel
7394en.book Page 13 Wednesday, March 30, 2005 9:45 AM
