Setup
SQT1111
66
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Quick Start” is not activated).
• If “On” is selected, the aerial signal is output
from this unit.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number
button ([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
Clock
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
•
[For_Australia]
Region Selection
Select the region where you live to adjust the
standard time.
• The time contained in the broadcast signal is
UTC (Universal time, coordinated).
• Daylight Saving Time
Select time offset from the standard time for
Summer Time.
• If there is a gap between displayed time and
actual time, set this function.
• Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number buttons.
2 Enter the new 4-digit PIN with the number buttons.
• Make a note of PIN in case you forget it.
e.g.,
3 Press [OK].
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (
>
56) are
downloaded automatically at the time you
have specified.
[For_New_Zealand]
Software Update Now ( Broadcast )
Refer to “Software (Firmware) Update”. (
>
56)
Software Update Now ( Internet )
Refer to “Software (Firmware) Update”. (
>
56)
Software Licence
Information about the software licence is
displayed.
System Information
Display Software (firmware) version of this unit.
Initialize
Shipping Condition
All the settings except for basic settings return
to the factory preset.
• The timer recording programmes are also
cancelled.
Default Settings
All the settings other than the tuning settings,
clock settings, disc language settings, rating
PIN, remote control code, etc. return to the
factory presets.
OK
Remember the PIN.
PIN Entry
0
0
0
0
DMRBWT460GN_eng.book 66 ページ ２０１６年４月１４日 木曜日 午後１２時３分
