39
VQT2S42
Preparation
¢
1 When [VIDEO OUT] is set to [PAL]
¢
2 When [VIDEO OUT] is set to [NTSC]
• Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every
1/50 seconds, where p= progressive scanning is a high density image signal that is scanning
the screen with all the effective scanning lines every 1/50 seconds.
The [HDMI] terminal on this unit is compatible with high definition output [1080i]. It is necessary
to have a compatible TV to enjoy progressive and high definition images.
• If the images are not output on the TV when the setting is [AUTO], match with the image format
your TV can display, and select number of effective scanning lines. (Please read the operating
instructions for the TV.)
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P165 for details.
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P167 for details.
[HDMI MODE]
Set the format for the HDMI output when playing back on the
HDMI compatible high definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for
output.
[720p]:
The progressive method with 720 available scan lines is used for
output.
[576p]
¢
1
/[480p]
¢
2
:
The progressive method with 576
¢
1
/480
¢
2
available scan lines is
used for output.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI mini cable (optional).
[OFF]:
Operation is performed with the buttons on this unit.
[ON]:
Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
}
[SCENE MENU]
Set the screen that is displayed when the mode dial is set to
,
, , ,
and .
[OFF]:
The recording screen in the currently selected
advanced scene mode (P101) or scene mode (P106)
appears.
[AUTO]:
The advanced scene mode or scene mode menu
screen appears.
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 39 ページ 2010年4月13日 火曜日 午後7時40分