VQT2S42
168
Connecting to other equipment
∫
Usable functions
Operate with the remote control for the TV.
Note
• Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while
when the operation icons are displayed. Operation icons are displayed when one of the
following buttons is pressed while the operation icons are not displayed.
–
3
/
4
/
2
/
1
, [OK], [OPTION], [RETURN], Red button, Green button, Yellow button
• It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
• When the [VIERA Link] (P39) of this unit is set to [ON], operation using the button on this unit
will be limited.
• VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
• If you are not using VIERA Link, set [VIERA Link] (P39) to [OFF].
Multi Playback
This is displayed initially when using the VIERA Link.
3
/
4
/
2
/
1
:
Select the image.
[OK]:
Go to one screen display.
Red button:
Switch the types of data to play back.
[OPTION]:
Display the Playback Mode selection screen.
• The type of data for playback changes in the order of [ALL]
>
[
]
>
[
]
>
[
]
>
[ALL].
• Either the [NORMAL PLAY], [SLIDE SHOW], [CATEGORY
PLAY], [FAVORITE PLAY] or the [CALENDAR] can be selected
in the Playback Mode selection screen when [ALL] is selected.
One screen display
Select the image while in Multi Playback, and then press [OK].
2
/
1
:
Go to previous/next image.
3
:
Display the recording information.
4
:
Return to Multi Playback.
[OK]:
Playback the motion picture (when motion
picture is selected).
Playback the audio (when picture with audio
is selected).
Red button:
Start the Slide Show.
[OPTION]:
Go to Slide Show setting screen.
• During Motion Picture Playback, use
2
/
1
for back/forward and
4
to stop playback.
Slide show
Press Red button during one screen display.
2
/
1
:
Go to previous/next image (when Slide Show
is paused/when motion picture is played back).
4
:
Finish the Slide Show and return to one
screen display.
[OK]:
Pause.
[OPTION]:
Go to Slide Show setting screen.
• To playback the audio of the motion pictures, set the [SOUND] in
the Slide Show setting screen to [AUTO] or [AUDIO].
A
Operation icon
A
A
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 168 ページ 2010年4月13日 火曜日 午後7時40分