Troubleshooting
VQT4C70
90
Troubleshooting guide
Update of the software (firmware) is started.
You cannot operate the unit until the update is
complete. (
>
82)
Software (firmware) is downloading.
Download will stop when the unit is turned on, or
the timer recording starts. (
>
82)
The media is not supported.
The software (firmware) is being updated.
You cannot operate the unit until the update is
complete. (
>
82)
The unit is hot.
The unit switches to standby for safety reasons.
Wait for about 30 minutes until the message
disappears.
Do not block the cooling fan on the rear of the
unit.
(When a disc is not inserted) A malfunction has
occurred. The unit is trying to restore to the
normal operation. Once the message disappears
you can use the unit again.
If it remains displayed, consult the dealer.
HDMI cannot be output because it is connected to
a model that does not support copyright
protection.
Due to the current disc not having authorised
copyright information, video output is not
performed.
START
SW-DL
UNSUPPORT
UPD
/
(“
∑
” stands for a number.)
U59
U61
U76
U77
DMRPWT520GL_eng.book 90 ページ 2012年2月9日 木曜日 午後6時15分