Troubleshooting
VQT4C70
89
To return all the settings to the factory preset
Perform “Shipping Condition” or “Default
Settings”. (
>
68, 81)
The following messages or service numbers
appear on the unit’s display when something
unusual is detected.
The remote control and main unit are using
different codes. Change the code on the remote
control. (
>
84)
TV Guide data is being downloaded.
If there is no change after switching the unit to
standby mode and turning it on, consult the
dealer.
• The disc is dirty. (
>
9) The unit cannot play.
• The lens cleaner has finished cleaning.
Press [
<
OPEN/CLOSE] on the main unit to
eject the disc.
• Displayed when the unit is started and is
switched to standby mode.
• There was a power failure or the AC plug was
disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the
message disappears.
There are already 32 timer programmes. Delete
unnecessary timer programmes. (
>
32)
The USB device is drawing too much power.
Remove the USB device.
Reset
Messages on the unit’s display
SET
(“
∑
” stands for a number.)
GUIDE
HARD ERR
NoREAD
PLEASE WAIT
PROG FULL
REMOVE
DMRPWT520GL_eng.book 89 ページ 2012年2月9日 木曜日 午後6時15分