52
RQT7542
Re
fe
re
n
c
e
Error messages
On the television
Page
On the unit’s display
Cannot finish recording
completely.
≥
The programme was copy-protected.
≥
The disc may be full.
—
—
Cannot playback this title.
TV system is different from the
setting.
To playback this title, please
change the TV System in
SETUP.
≥
You tried to play a title recorded using a different encoding system from that of the TV
system currently selected on the unit.
Alter the “TV System” setting on this unit to suit.
46
Cannot record on the disc.
≥
The disc may be dirty or scratched.
≥
You cannot format a Microdrive or mobile hard disk on this unit.
57
—
Please check the disc.
Unable to format.
Cannot play on this unit.
≥
You tried to play a non-compatible image.
≥
Turn the unit off and re-insert the card.
26
26
Cannot record. Disc is full.
≥
Create space by erasing any unnecessary titles.
[RAM]
(Even if you erase recorded content from the DVD-R, there is no increase in disc space.)
≥
Use a new disc.
24, 31,
38, 39
—
Cannot record. Maximum
number of titles exceeded
Error has occurred. Please
press ENTER.
≥
Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(“SELF CHECK” appears on the unit’s display).
—
No Disc
≥
The disc may be upside down.
—
No folders.
≥
There is no compatible folder in this unit.
15
No PC CARD
No SD CARD
No valid PC card.
No valid SD card.
≥
The card is not inserted. If this message is displayed with a compatible card already
inserted, turn off the unit, remove and then re-insert the card.
≥
The card inserted is not compatible or the card format does not match.
26
15
Not enough space on dubbing
destination.
≥
Create space by erasing any unnecessary items.
24, 27, 31,
34, 38, 39
Please change the disc.
≥
There may be a problem with the disc. Press [
<
OPEN/CLOSE] on the main unit to
remove it and check it for scratches or dirt. (The unit turns off automatically after you open
the tray.)
57
This is a non-recordable disc.
≥
The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.
≥
You inserted an unformatted DVD-RAM. Format the disc with this unit.
—
39
This disc is not properly
formatted.
Formatting is necessary using
DISC MANAGEMENT.
$
≥
The operation is prohibited by the unit or disc.
—
HARD ERR
≥
If there is no change after turning the unit on and off, consult the dealer where the unit was
purchased.
—
NO READ
≥
The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥
You have used a DVD-RAM/PD lens cleaner and it has finished. Press [
<
OPEN/CLOSE]
on the main unit to eject the disc.
57
—
PROG FULL
≥
There are already 16 timer programmes. Delete unnecessary timer programmes.
21
REMOTE DVD
(“
∑
” stands for a number.)
≥
The remote control and main unit are using different codes. Change the code on the
remote control.
Press and hold [ENTER] and the indicated number
button at the same time for more than 2 seconds.
13
SELF CHECK
≥
The unit is starting up. Wait until the message disappears.
—
U14
≥
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
—
U99
≥
The unit fails to operate properly. Press [
Í
/I] on the main unit to switch the unit to standby.
Now press [
Í
/I] on the main unit again to turn the unit on.
—
UNSUPPORT
≥
You have inserted a disc the unit cannot play or record on.
14
X HOLD
≥
The Child Lock function is activated.
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
47
52
E65.book Page 52 Thursday, February 24, 2005 2:41 PM
Содержание Diga DMR-E65
Страница 59: ...RQT7542 MEMO 59 ...