Panasonic D-Snap SV-AS3, Руководство по эксплуатации

Страница: 97 / 112

97
VQT0P18
Question Answer
The color or the
brightness of the
LCD Monitor
changes.
The color or the brightness of the screen may look
different under fluorescent light.
The LCD Monitor is
too bright or dark. Adjust the brightness of the LCD Monitor properly.
(P23)
Cannot record.
Is the card inserted?
You cannot record pictures when the write-protect
switch on the card is slid toward [LOCK].
Is the memory of the card full?
Delete unnecessary files before recording. (P47)
It takes time to
record onto a card.
When you record pictures in [MPEG4] mode, it may
take time to record onto a card depending on the
type of card. However, this is not a malfunction.
Recording stops
halfway. Recording in [Voice] mode may be stopped halfway
depending on the type of card.
Recorded pictures
appear in mosaic-
like pattern.
Pictures may appear in a mosaic-like pattern
depending on the subject or recording conditions.
The pictures
recorded are too
bright or dark.
The brightness of a picture on the LCD Monitor may
be different from that of a picture actually recorded.
Especially when you record a picture in dark places
with long exposure, the picture looks dark on the
LCD Monitor. However, the picture is recorded
brightly.
A vertical red
spectrum appears
on the LCD Monitor.
This is called “smear”. It is specific to CCD, not a
malfunction. It appears when the subject has a
bright part. It is recorded on MPEG4 images, but not
recorded on still pictures.
VQT0P18Eng.book 97 ページ ２００５年１月１２日 水曜日 午前９時１１分