15
VQT0P18
∫
When inserting the card/battery
Confirm the direction of the battery and the card.
Insert the battery fully into the slot with the Battery Lock
1
lowered.
Make sure if the Battery Lock is hooked on the Battery
2
.
≥
Place the battery with the label side upward.
A
≥
Insert the battery in the direction indicated by the arrow.
B
3
Label
4
Notch
• Insert the card/battery fully and firmly.
(The card clicks if it is fully inserted.)
• Do not touch the connecting terminal on the rear of the card.
• If the Battery Lock is not hooked on the battery or you have difficulty
in closing the Card/Battery Door, the battery may be inserted in the
wrong direction. Pull the battery out with the Battery Lock unlocked
and check the direction of the battery.
∫
When removing the card/battery
1
A
B
2
4
3
2
1
1
Point the bottom of the unit
downwards with the Door open. Lift
the Battery Lock
1
, then remove the
battery.
Press the card until it
clicks and then pull out
the card.
VQT0P18Eng.book 15 ページ 2005年1月12日 水曜日 午前9時11分
Содержание D-Snap SV-AS3
Страница 110: ...110 VQT0P18 MEMO ...