11
Item
Explanation
Set temp.
Set the temperature.
1)
Touch [Set temp.].
2)
Set the temperature with
and
.
(± in 1 °C steps)
<Setting ranges>
y
In cooling or drying mode: Between
18 °C and 30 °C
y
In heating mode: Between 16 °C and
30 °C*
1
y
Automatic: Between 17 °C and 27 °C
*1 The upper limit for gas heat pump air
conditioners is 26 °C.
Fan SPD
Set the strength of the fan.
1)
Touch [Fan SPD].
2)
Select the fan speed (
(high),
(mid), (low),
(automatic)).
Flap
Set the direction of the airflow.
1)
Touch [Flap].
2)
Set the flap to the desired position (
(F1), (F2), (F3), (F4), (F5),
(Swing)).
Touch
during the swing to stop the flap
at the desired position.
y
Heating, fan, and automatic (heating)
can be adjusted in 5 steps and cooling
and dry can be adjusted in 3 steps.
y
You can set either or
if the
model does not support airflow direction
settings.
Prohibitn.*
2
Set whether to allow or prohibit use of the local
remote controller.
1)
Touch [Prohibitn.].
2)
Use
to select from “Accept”,
“Prhbt1”, “Prhbt2”, “Prhbt3”, or “Prhbt4”.
Accept: Allows operations with the remote
controller.
Prhbt1 to Prhbt4: Operations on the
remote controller are restricted.
Eco
Enable or disable energy saving operation.
1)
Touch [Eco].
2)
Select “Valid” or “Invl”.
Enable or disable ECONAVI setting.
1)
Touch
.
2)
Select “Valid” or “Invl”.
*2 Example of prohibiting or enabling remote controller use (factory
setting)
ON/OFF
Mode
Set temp.
Fan
SPD
Flap
Eco
Accept
Prhbt1
Prhbt2
Prhbt3
Prhbt4
: Operation and setting with the remote controller is possible
: Operation and setting with the remote controller is not possible
6
Touch [Transmit].
z
The settings are registered and the “Settings” dialogue
closes.
z
To cancel the settings, touch [Cancel].
6
Note
y
Touch
(or
) at the upper value (or lower value) of the
set temperature and the set value becomes a blank (no setting).
Make the setting blank when you want no setting.
Furthermore, touch
(or
) and the upper value (or lower
value) is displayed.
For example: If upper value 30 °C and lower value 18 °C (when
cooling)
19 °C
18 °C (lower limit value)
(blank)
30 °C (upper limit value)
29 °C
Setting
CZ-256ESMC3_QR_EU.indd 11
2016/09/12 17:13:20
