20
CY-VHD9500U
CY-VHD9500U
21
Before Installation
E
N
G
L
I
S
H
1
E
N
G
L
I
S
H
2
30
e
30
e
Display Unit Lateral Angle
Adjustment
You can swivel it to the left and right, 30˚ each way.
Hold the display unit by the non-slip part in the
upper half of it and adjust its lateral angle.
Maximum
120
e
Open the Display Unit
1
Push the display release button (PUSH OPEN)
until the display is unlocked.
(Press the button with one hand while holding
the display with the other.)
2
Open the display unit by both hands until a
comfortable viewing angle is reached.
Close the Display Unit
Move the display unit by both hands until the
display release button is locked.
Note:
≥
Always use both hands to open or close the
display unit.
≥
Always check that the display release button is
locked after closing the display unit.
≥
If the display unit cannot be locked, be sure to
consult your dealer and remedy the situation.
(PUSH OPEN)
Safety Installation Diagram
WARNING:
≥
Have a professional technician wire and install the product.
Professional skill and experience is required to wire and install the product. Improper installation
could result in failure of safety equipment resulting in accident and injury. For safety’s sake,
always ask the store from which you purchased the product to install and wire it for you.
Approximately 5
15
/
16
q
(150 mm)*
Approximately
11
13
/
16
q
(300 mm)
Maximum
120˚
Approximately
11
13
/
16
q
(300 mm)
≥
This unit opens and closes at the maximum dimensions given below.
* Install the product in such a way as to maintain
the distances shown even when the display unit
is rotated by 30˚ toward the front seat headrest
(page 21).
Installation angle: Less than 20˚
Perform the adjustment below in order to provide the installation range shown in the fi gure on the left.
