94
CY-VHD9500U
CY-VHD9500U
95
Notes on Discs/Cards
Notes on CD-Rs/RWs
≥
You may have trouble playing back some
CD-R/RW discs recorded on CD recorders
(CD-R/RW drives), either due to their recording
characteristics or dirt, fi ngerprints, scratches, etc.
on the disc surface.
≥
CD-R/RW discs are less resistant to high
temperatures and high humidity than ordinary
music CDs. Leaving them inside a car for
extended periods may damage them and make
playback impossible.
≥
Some CD-R/RWs cannot be played back
successfully thanks to incompatibility among
writing software, a CD recorder (CD-R/RW drive)
and the discs.
≥
This player cannot play the CD-R/RW discs if the
session is not closed.
≥
This player cannot play the CD-R/RW discs which
contain data other than CD-DA or MP3 data.
≥
Be sure to observe the instructions of CD-R/RW
disc for handling it.
Maintenance
How to hold the disc or card
≥
Do not touch the play surface or the terminal
surface.
≥
Do not scratch the disc or card.
≥
Do not bend the disc or card.
≥
When not in use, keep the disc or card in the case.
Label side
Do not use discs that fi t any of the descriptions
given below. Using these discs may damage the
discs or cause the unit to malfunction.
E
N
G
L
I
S
H
51
E
N
G
L
I
S
H
52
SD card precautions
≥
Do not leave the SD cards where they will become
hot or exposed to direct sunlight or where
electromagnetic waves or static occurs readily.
Failure to heed this precaution may cause the
cards to be damaged or their data to be lost.
≥
Keep the terminal area on the back of the cards
free from dirt, water and foreign matter. Do not
touch this area with your hands or any other
objects.
≥
Static or malfunctioning of the unit or the cards
may cause the cards to be damaged or their data
to be lost. It is recommended that valuable data
be stored on the PC as well.
Do not leave discs or cards on the following
places:
≥
Direct sunlight
≥
Near car heaters
≥
Dirty, dusty and damp areas
≥
Seats and dashboards
Disc cleaning
Use a dry, soft cloth to wipe from the center
outward.
<Correct>
<Wrong>
Do not attach any seals or labels to your discs.
Do not detach the label and do not attach other
labels to the card.
Do not write anything on the disc label with a
pointed pen or hard-point pen.
When inserting a disc into or ejecting and
removing it from the unit, insert it straight in or
eject and remove it straight out in parallel with
the unit. Otherwise, the disc may be scratched or
marked in the process.
Special discs in a shape which is not round
Discs with adhered labels, etc. on them
Disc with adhered
stickers or tape
Labels created by a
printer
Protective fi lms or
sheets
Disc accessories
(stabilizers, etc.)
Damaged or deformed discs
Discs with burrs
Discs with cracks,
scratches or parts
missing
Shoddily made discs
