40
CY-VHD9500U
CY-VHD9500U
41
Troubleshooting
Troubleshooting Tips
Common
Problem
Possible cause
Possible solution
Sound is not
generated.
Cables are not correctly connected.
Connect cables correctly.
Problem
Possible cause
Possible solution
Noise
The contact of the ground lead is
poor.
Make sure that the ground lead is
connected to an unpainted part of the
chassis securely.
DVD video
Monitor
The tilt angle or
the lateral angle of
the display is not
adjustable.
There is an obstacle.
Install the unit where the unit moves
freely.
Problem
Possible cause
Possible solution
Noise is made in
step with engine
revolutions.
Alternator noise comes from the
car.
Change the wiring position of the
ground lead.
Mount a noise fi lter on the power
supply.
The picture does
not appear on the
monitor.
Cables are not correctly connected.
Connect cables correctly.
VCR, Camcorder, etc..
Problem
Possible cause
Possible solution
The picture from a
VCR or a camcorder
is not displayed.
A VCR or Camcorder is not
connected correctly.
Connect a VCR or Camcorder correctly.
E
N
G
L
I
S
H
21
E
N
G
L
I
S
H
22
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch the power off.
Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit by yourself because it is dangerous to do so.
WARNING:
≥
Do not use the product when it is broken or there is some abnormality.
In the unlikely event that the product breaks (such as when no image is displayed or there is no sound)
or there is some abnormality (such as when a foreign object is inside the product, water was spilled
on it, smoke comes out or the product makes a strange smell), immediately stop using the product and
be sure to contact the store from which you purchased your product or a nearby Panasonic Servicenter.
Continuing to use the product in that condition could cause accidents, fi re or electrical shock.
Sound skipping due to
vibration
The unit is not suffi ciently secured.
Mount the unit securely with the
mounting parts, referring to the
installation instructions.
Disc unejectable
The microcontroller in the unit
operates abnormally due to noise
or other factors.
Unplug the power cord and plug it
again. In case the unit is still out of
order, consult the dealer.
Problem
Possible cause
Possible solution
DVD video/Video CD/CD/MP3
