32
CX-DH801U
5
English
DVD Changer Basics
(Continued)
Loading and Removing a Disc
❑
To Load a Disc
q
Place the disc magazine with the direction arrow facing
upward, and pull out trays fully one after another from
the magazine.
w
Place a disc on the tray.
e
Push the tray straightforward into the magazine
until it
clicks in position (See caution above)
.
Note:
¡
Be careful not to insert more than one disc on a single
tray to protect the unit from any unexpected troubles.
¡
Please insert discs so that the same types of discs are
arranged successively, as far as possible. Discontinuous
arrangement of the same type discs may cause the unit to
take a long time to change discs.
¡
Be sure to use the magazine and the trays supplied with
the unit as an accessory (VYQ3174).
Any other maga-
zines can not be used.
¡
Never use protection film or stabilizer commercially avail-
able as a disc accessory for the unit because it may cause
trouble.
¡
Do not use irregularly-shaped discs. Failure to observe
this may cause malfunction.
❑
To Remove a Disc
Pull out trays from the magazine to the stopper position, and
take a disc from each of them by hand.
Be careful not to allow the disc to drop to the ground while tak-
ing it out.
Note:
Carefully handle the magazine since discs may be disen-
gaged and come out, if the magazine is placed with its disc-
inserting port facing downward.
Magazine
Tray
Disc with the labeled side
q
w
e
Magazine Inserting
Direction Arrow
Caution:
Insert disc trays into the magazine firmly until they click. Failure to do so may cause disc clogging in
the DVD changer unit or a malfunction of your DVD changer.
Note:
The disc trays of the DVD changer are
easy to remove from the magazine. Please watch
out the trays are not slipped out from the maga-
zine when installing a disc.
If one of the trays is slipped out and removed,
insert the disc tray into the magazine gently until
a click is felt.