29
CX-DH801U
2
English
Names of Controls and Functions
Remote Control Unit
❑
General
Aim the remote control at the remote control sensor and operate it (see below note).
Notes on Remote Control and connections:
¡
Aim the DVD changer’s remote control unit at the remote control sensor on the monitor display (In the case of connect-
ing its Remote-Out with DVD changer’s Remote-In) or the included remote control sensor and operate it.
¡
If the control unit equips with the remote control sensor and forwards the remote control data to the DVD changer, you
can operate it with aiming at the control unit.
¡
Never use both Remote-Ins (One is mini-pin, the other is RCA) at the same time. Failure to observe this may cause mis-
operation.
¡
Misoperation may occur if the remote control sensor is near other infrared equipment (Example: Infrared Headphone
system). In this case, install the remote control sensor of your DVD Changer apart from other infrared equipment.
[0]
to
[9]
¡
Sets the language code. (
a
page 55)
[MENU]
¡
Shows the menu screen. (
a
page 37)
[SETUP]
¡
Shows the SETUP menu. (
a
page 42)
[OSD]
¡
Displays information about each source
on the screen. (
a
page 35)
¡
Toggles NTSC/PAL. (
a
page 44)
[
}
] [
{
]
¡
Selects (vertically) or adjusts
an operation or item.
[
]
] [
[
]
¡
Selects (horizontally) or adjusts
an operation or item.
[ENTER]
¡
Determines an operation or item.
TRACK/SEARCH
DISC/FOLDER
NTSC/PAL
TITLE/CHAPTER
TRACK
STOP
RANDOM
RETURN
PAUSE
PLAY
REPEAT
SUBTITLE
CAR AV
TITLE
E
N
T
E
R
SETUP
MENU
RAND
SCAN
REP
GRP
RET
ANGLE
SUB
AUDIO
1
2
3
4
5
6
7
OSD
8
0
9
[DISC
}
] [DISC
{
]
(DISC/FOLDER)
¡
Selects a disc. (
a
page 34)
[
}
]
[
{
]
[
]
]
[
[
]
[ENTER]
