63
CX-DH801U
36
English
Electrical Connection
Overview
Cautions:
• This unit is designed for use in a car having a 12 V negative ground battery system.
• Be sure to insulate any exposed wires from the car chassis. Bundle all cables and keep cable terminals free from
any metal parts.
• Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may
clear the memory.
• Run the cords avoiding the spots where the temperature can be extremely high.
Note:
• To prevent from damage to the unit, be sure to follow the wiring diagrams below.
• Be sure to fully plug in the connectors. Secure them with clamps and tapes.
• All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer
or your dealer if other methods are required.
ACC
PARKING BRAKE
H
A
M4X5mmMAX
B
C
V
H.A
H
C
V.A.B
V
B
C
REMOTE-IN
REMOTE-OUT
BATTERY 5A
VIDEO-CONT
REMOTE-IN
POWER
DVD Changer
CX-DH801U
u
Extension Cord
(BRAKE/VIDEO-CONT/ACC/BATT/DIN/RCA/GND)
Remote Control Sensor
o
Ground Lead
To a clean, bare metallic part
of the car chassis
Parking brake connection lead
Be sure to wire the parking
brake for safety and preventing
Accident.
Video control lead (output)
To Video control lead (input) of
other equipment
Power Lead
To ACC power, + 12 V DC.
Battery Lead
To the car battery, continuous
+ 12 V DC.
(Black)
(Blue/yellow stripe)
(Green/yellow stripe)
(Red)
(Yellow)
Remote-In (Mini. Pin)
To the remote control sensor or
Remote-out of other equipment
Remote-Out (RCA)
To Remote-In of other equipment
such as TV tuner
Remote-In (RCA)
To Remote-out of other equipment
DIN Cable
To the changer connector
Video output
RCA Cable
Audio output (R)
Audio output (L)
(Black)
(Black)
(Black)
(Black)
(Yellow)
(Red)
(White)
Fuse 5 A
Attaching the remote control sensor
o
Double-Faced Adhesive
Tape
!2
Attach the
receiver.
Use the remote control
sensor extension cord
!0
if the original
remote control sensor
cord cannot reach the
DVD changer unit.
Note:
The remote control sensor should be installed where
it is not exposed to direct sunlight and where it does not
interfere with driver’s operations.
Fix the Remote Control
Sensor Cord with
1
Cord
Clamp
!1
Installation, Electrical Connection