62
CX-DH801U
35
English
Installation
(Continued)
Typical horizontal installation
1
Mount a mounting bracket (L) or (R) on either side of
the control unit with a hex. bolt together with double
washers (4 mm
φ
x 8 mm).
Mounting bracket (L)
r
Mounting bracket (R)
t
Hex. bolt with double
washers (4 mm
φ
x 8 mm)
q
x 4
Typical vertical installation
Mount the unit with the mounting bracket on either side
with a hex. bolt with double washers (4 mm
φ
x 8 mm).
Mounting bracket (L)
r
Mounting bracket (R)
t
Hex. bolt with double
washers (4 mm
φ
x 8 mm)
q
x 4
2
Select a location where the unit should be mounted.
Fix the base brackets with a double-faced adhesive
tape.
Base bracket
w
x 2
Double-faced adhesive tape
y
x 2
3
Use a cutter to cut a small cross in the carpet in
accordance with the locations of the 5 mm
φ
bolts of
the base brackets.
Base bracket
w
x 2
Carpet
Fix both the base brackets and the double-faced adhesive
tape to a mounting surface below the carpet.
4
Mount the unit on the carpet with four hex. nuts
(5 mm
φ
).
Hex. nut (5 mm
φ
)
e
x 4
Carpet
Relationship between mounting
holes and angles
The relationship between mounting holes and angles of the
mounting brackets (L and R) is illustrated above. Symbols
corresponding to the mounting angles are marked near the
respective holes. Select the correct holes in accordance
with the mounting angles to be used.
Mounting bracket (L)
Mounting bracket (R)
A
A
C
B
B
V
V
R
C
H
H
A
A
C
B
B
V
V
L
C
H
H
