Panasonic CS-S12MKQ, Руководство по обслуживанию

Страница: 72 / 144

72
•
e-ion Check Mode
o
e-ion abnormality check mode
o
Purpose is to improve sensor serviceability when sensor is malfunction.
(1) Control starting condition
When all of the conditions are formed
ƒ Not in Patrol Demo mode.
ƒ e-ion operation ON.
ƒ When e-ion check mode signal is received; the procedure of selection is as shown:
•
Press “Set” button continuously for 15 seconds by using pointer to enter internal setting mode.
•
Press “Timer Decrement" button to select “CHC”.
•
Confirm setting by pressing “Timer Set” button, a “beep” sound will be heard.
SET
SET
Transmit Patrol default OFF/ON code
(Buzzer: OFF:Long Beep, ON:Short Beep)
Press continously for 15s
SET
Transmit Patrol demo code
(Buzzer: OFF:Long Beep, ON:Short Beep)
SET
Transmit ECO demo code
(Buzzer: OFF:Long Beep, ON:Short Beep)
SET
Transmit check code
(Buzzer:Short Beep)
o
If abnormal discharge is detected at filter (short-circuited) due to water or dust adhesion, etc., the e-ion
indicator blinks immediately.