Panasonic CS/CU-HU12AKY Series, Руководство по эксплуатации и установке

Страница: 20 / 32

Installation instructions
20
Step-4
Cut and fl are the embedded piping
•
When determining the dimensions of the piping,
slide the unit all the way to the left on the installation
plate.
•
Refer to the section “Cutting and fl aring the piping”.
Step-5 Install the Indoor Unit
Step-6 Connect the piping
•
Please refer to “Connecting the piping” column in
outdoor unit section. (Below steps are done after
connecting the outdoor piping and gas-leakage
con
fi rmation.)
Step-7 Insulate and fi nish the piping
• Please refer to “Insulation of piping connection”
column as mentioned in indoor/outdoor unit installation.
Step-8 Secure the Indoor Unit
g n i k r a m
To take out the unit, push
the
marking at the
bottom unit, and pull it
slightly towards you to
disengage the hooks
from the unit.
Guide
surface
Connection cable
About 70 – 80 mm
Connection cable
Gas side piping
Liquid side piping
Drain hose
Insert the connection cable
(This can be used for left rear piping and bottom piping also.)
•
How to pull the piping and drain hose out, in case of the
embedded piping.
•
In case of left piping how to insert the
connection cable and drain hose.
Rear view for left piping installation
Drain cap
Drain hose
Adjust the piping slightly
downwards.
Drain hose
Connection cable
PVC tube
for drain
hose
Indoor unit
100 mm (1.5 ~ 2.0HP)
or 72 mm (2.5HP)
Piping
Cable
Apply putty or
caulking material
to seal the wall
opening.
Connection cable
Piping
More than
470 mm
More than 950 mm
(1.5
~ 2.0HP) or
Mor
e than 1150 mm
(2.5
HP)
PVC tube (VP-65) for piping
and connection cable
PVC tube for drain hose (VP-30)
PVC tube for drain
hose (VP-20)
More than 700 mm
Drain hose
from main unit
Replace the drain hose
Sleeve for piping hole
Drain hose
Piping
Connection cable
More than 950 mm (1.5 ~ 2.0HP) or
More than 1150 mm (2.5HP)
(For the right piping, follow the same procedure)
Cable
45°
Drain
hose
Piping