Panasonic CS/CU-HU12AKY Series Скачать руководство пользователя страница 13

English

13

Cleaning instructions

To ensure optimal performance of the unit,
cleaning has to be carried out at regular 
intervals. A dirty unit may cause malfunction.
Please consult authorised dealer.

• Switch off the power supply and unplug before 

cleaning.

• Do not touch the aluminium fin, sharp parts may 

cause injury.

• Do not use benzine, thinner or scouring powder.

• Use only soap (  pH 7) or neutral household 

detergent.

• Do not use water hotter than 40 °C.

Indoor unit

Wipe the unit gently with a soft, 
dry cloth.

**Ag Clean

+

 Filter & **PM 0.1 filter

• Clean the filter whenever necessary.
• Don’t wash/rinse the filter with water.
• The surface of the filter shouldn’t be rubbed
  with any object.
• The filter shouldn’t be pulled with strong force
  as it may get damaged.

Ag Clean

+

 Filter / PM 0.1 filter.

For seasonal inspection after extended 
non-use

• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL

operation. After 15 minutes of operation, it 
is normal to have the following temperature 
difference between air inlet and air outlet 
vents:

COOL:  8 °C

For extended non-use

• Activate nanoe-G operation for 2~3 hours as 

an alternative to remove moisture left in the 
internal parts thoroughly to prevent mould 
growth.

• Turn off the power supply and unplug.
• Remove the remote control batteries.

**nanoe-G Generator

For better efficiency, please clean generator
brush regularly as per below process.

• Turn off main power supply.
• Clean with dry cotton bud.
• Do not touch during operation.

Please remove the Ag Clean

+

 Filter / PM0.1 Filter before wash/rinse 

the dust filter with water. Ag Clean

 filter applicable to specific 

models only.

Dust filters

Every 2 weeks

• Wash/rinse the dust filters gently 
  with water to avoid damage to the 
  filter surface.
• Dry the dust filters thoroughly under shade, 
  away from fire or direct sunlight.
• Replace any damaged filters.

Remove air filter

Attach air filter

Indoor unit

Front panel

Dust filters

**Ag Clean

+

Filter

nanoe-G

Generator

Aluminium fin

**PM 0.1 filters 

**PM 2.5 Sensor

• Turn off main power supply.
• Open the Front Panel.
• Peel off the tape on sensor surface (as shown image).
• Clean the lens with cotton swab, after that paste
  the tape at same location.

Note :

 Dirt on the lens may lower sensor sensitivity. Do not scratch the 

lens with something hard.Do not use alcohol or cleanser to wipe the dirt.

For better detection of AQI Level, as and when
required you may need to clean sensor lens as
per below process.

To learn more / Cleaning Instructions

Note:

** Applicable for selected models.

Содержание CS/CU-HU12AKY Series

































Отзывы: