Operating Instructions
161
6.1.7
Loading Settings from a Configuration File
Camera settings can be loaded from a configuration file. If you reset the camera to
factory default, the camera can load previously used settings from a configuration
file.
Note
•
The configuration file also saves network settings. When settings are loaded,
the network settings are also loaded.
•
If you try to update the camera, create a configuration file after updating the
firmware. If there is a firmware version difference between the camera that you
create a configuration file from and the camera that you try to load settings to,
the settings may not have been loaded to the camera.
1.
Click [Load Settings] on the Maintenance page.
2.
Click [Browse...].
3.
Select the configuration file on the Choose file dialog box, and click [Open].
•
The file name is displayed in the data field.
4.
Confirm the file name, and click [Load].
5.
Click [Restart].
•
The camera restarts, and the Top page is displayed.
