Panasonic CQDF602U - AUTO RADIO/CD DECK Скачать руководство пользователя страница 158

Страница: 158 / 198

Operating Instructions

158

6.1.5

Updating the Camera Firmware

The Update Firmware page allows you to update the camera’s firmware. If new
firmware is available, install it into the camera.

Note

•

Do not turn off the power during a firmware update.

•

All buffered images on the internal memory will be deleted after the firmware
update. The buffered images on the SD memory card are not deleted.

•

The firmware version is displayed on the Top page and the Status page.

•

If the camera's firmware is updated, all alarm logs are deleted.

Download the new firmware from the Panasonic Network Camera support
website at

http://panasonic.co.jp/pcc/products/en/netwkcam/

, and save it

on your PC.

Click [Update Firmware] on the Maintenance page.

Click [Update Firmware].

•

The camera restarts.

•

The Update page is displayed after about 1 minute.

Содержание CQDF602U - AUTO RADIO/CD DECK







































































































































































































Результаты поиска

Содержание CQDF602U - AUTO RADIO/CD DECK

Отзывы:

Panasonic CQDF602U - AUTO RADIO/CD DECK, Руководство по эксплуатации, Страница: 158 / 198

Результаты поиска

Содержание CQDF602U - AUTO RADIO/CD DECK

Отзывы: