Operating Instructions
83
Return to
Specified
Position
•
If the camera is not operated during the specified period,
the camera turns to a specified position.
•
The following settings are available:
–
Time: Do not move, 10 s, 20 s, 30 s, 1 min, 5 min,
10 min, 30 min, 1 h
–
Specified Position: Home Position, Preset No.1—
20, Alarm No. 1, Alarm No. 2
Note
•
A preset position (1—20) is displayed as a ("preset
number"."preset name"). (e.g.: 1.sample)
•
When registering preset positions, set Time long
enough to complete the registration process. If Time is
set too short, the camera will return to the specified
position while registering preset positions.
•
If you did not set any presets, the camera cannot turn to
the preset position.
Color Night
View
•
In the color night view mode, the camera image becomes
brighter in a low illuminance. The camera image returns to
normal operation in a bright location.
•
In color night view mode, the following may be
experienced:
–
Image refresh interval may increase.
–
Images may blur when viewing moving objects or
using Pan/Tilt/Zoom in low illuminance.
–
It may take a while to focus on some objects by
auto focusing.
–
Images may not be displayed correctly on a TV.
Note
•
In the color night view mode, the image may have white or
colored dots around the object. This is not a problem, since
it is a CCD sensor characteristic.
Vertical
Resolution (for
640 x 480
mode)
When viewing motion images in 640 x 480 resolution, scan
lines may appear when objects pass horizontally in front of the
camera or when the camera pans horizontally. Set to "240" to
remove the scan lines.
*1 See page 84 for details about pan/tilt range settings.
*2 These home position settings are displayed as you set on page 30.
Setting
Description
