Operating Instructions
110
7.
Set the image buffer frequency, and click [Next>].
•
Clicking [<Back] takes you back to the previous page.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
•
Due to the network environment, object, the number of simultaneous
accesses, enabling IPsec or SD memory recording, the camera may not
record number of images that you set. In this case, set the image buffer
frequency longer.
•
Set Every [1 s], buffer [1] images for the SD memory recording.
Image Quality
•
Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for enhanced motion.
[Mobile Phone] is for a transfer to a cell phone.
Note
•
640 x 480 pixels cannot be set for a transfer to a cell phone.
Setting
Description
Enable Pre-
trigger Image
Buffer
•
Check the box to enable the setting. The camera buffers or
transfers the image right before the alarm signal is
detected.
•
Set an interval, number of images to buffer and total
number. The number of buffered images may not match
the total number (see page 191) due to memory capacity,
image resolution, image quality or what object you view.
Setting
Description
