Panasonic CQDF602U - AUTO RADIO/CD DECK Скачать руководство пользователя страница 97

Страница: 97 / 198

Operating Instructions

4.2

Buffering or Transferring Images by Timer

The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.

Note

•

If you are recording images to the SD memory card, refresh interval slows
down.

Click [Trigger] on the Setup page.

Click a

No.

to enable buffer/transfer.

Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click
[Next>].

•

Click [Delete Buffered Images] to delete images already buffered.

•

Click [Save] to save the settings.

•

Clicking [Cancel] takes you back to the Trigger page without saving
changes.

Note

•

If you click [Save], all buffered images on the SD memory card are
deleted.

Setting

Description

Enable Image
Buffer/Transfer

•

Check the box to enable the buffer/transfer. Uncheck the
box to disable it.

Содержание CQDF602U - AUTO RADIO/CD DECK







































































































































































































Результаты поиска

Содержание CQDF602U - AUTO RADIO/CD DECK

Отзывы:

Panasonic CQDF602U - AUTO RADIO/CD DECK, Руководство по эксплуатации, Страница: 97 / 198

Результаты поиска

Содержание CQDF602U - AUTO RADIO/CD DECK

Отзывы: