1
1 Hardware Installation and Connection
Note:
All the installation and operations here should conform to your local electrical safety rules.
1.1
Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of
the DVR.
1.2
About the Panels and Cover
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the
User
’s Manual
included in the resource CD.
The model label in the front panel is very important; please check according to your purchase
order.
The label in the top cover
is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
1.3
HDD Installation
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
Please follow the instructions below to install hard disk.
1. Loosen the screws of the upper
cover and side panel.
2. Fix four screws in the HDD (Turn
just three rounds).
3. Place the HDD in accordance
with the four holes at the bottom.
4. Turn the device upside down and
then turn the screws in firmly.
5. Fix the HDD firmly.
6. Connect the HDD cable and
power cable.