Panasonic CF-T8 series, Дополнительное руководство по инструкции

Страница: 8 / 20

8
More Advanced Security
You can increase your computer’s security level by setting the BIOS level
described in this section.
There is [Fingerprint Security] in [Security] menu in the Setup Utility. Can be
changed only when [Set Supervisor Password] is set.
Sub-Menu Protection
You can change displayed or not displayed and enabled or
disabled of the Sub-Menu.
Not Protected
Protected
Power-on Security
Change Enable or Disable of Power-on Security ( Î page 7).
When the Power-on Security is set to [Disabled], the Power-on
Security does not function even if [Power-on Security] is set to
[Enabled] on the Setup Utility.
Disabled
Enabled
Security mode
You can start up Windows by sliding a registered fi nger when
[Simple] is set.
If you set [High], you have to enter Supervisor Password by
following authentication in Power-on Security.
It will not be displayed if Power-on Security is disabled.
Simple
High
Starting “Control Center” screen
1
<Model with Windows 7>
Click (Start) - [All Programs] - [Protector Suite] - [Control
Center].
<Model with Windows XP>
Click [start] - [All Programs] - [Protector Suite] - [Control Center].
2
Swipe your fi nger.
The “Fingerprint Control Center” screen appears.
You can start “Control Center” with the following procedure, too.
A
Right-click the “Fingerprint software” icon in the noti fi cation area.
B
Select [Start Control Center].
DFQX5712ZA̲W8F8T8̲OI̲V̲XP̲M.indd8 8 DFQX5712ZA̲W8F8T8̲OI̲V̲XP̲M.indd8 8 2010/01/22 13:03:40 2010/01/22 13:03:40