Panasonic CF-T8 series, Дополнительное руководство по инструкции

Страница: 13 / 20

13
Troubleshooting
When a problem occurs, refer to this page. If you still cannot troubleshoot the
problem, contact your technical support of
fi ce.
(Enrollment and authentication is unavailable to an extremely minority of people
including those whose
fi ngerprints give little data for personal identi fi cation.)
For Devices
The sensor does not
enroll or authenticate
my
fi ngerprint.
Slide your fi nger correctly. (For further information
about enrollment and authentication, refer to “How
to Use the Fingerprint Reader” (
Î page 3) and
“Fingerprint Tutorial”.
A
Start “Control Center” (
Î
page 8)
B
Click [Help] - [Tutorial].
The sensor enrolls or authenticates no fi ngerprint, or
performs authentication poorly, despite the correct
way of
fi nger sliding when your fi nger is in any of the
conditions stated below:
• Rough skin, or injured
fi nger (with a cut or a skin
in fl ammation)
• Extremely dry
• Soiled with mud or oil
• Fingerprint has been worn and has faded
• Wet with water or sweat
<You can improve enrolling and authentication
sensitivity by taking the following steps when any of
the conditions described above exists>
• Wash your hands or wipe them dry.
• Use a different
fi nger for registration or
authentication.
• Treat your fi nger with a hand cream when it is
rough skin or dry.
Clean the fi ngerprint sensor. (For further information,
refer to “Handling & Maintenance” ( Î page 10))
The fi ngerprint sensor may be malfunctioning when it
continues to perform poorly after the steps described
above have been performed. Contact your technical
support of
fi ce.
DFQX5712ZA̲W8F8T8̲OI̲V̲XP̲M.indd13 13 DFQX5712ZA̲W8F8T8̲OI̲V̲XP̲M.indd13 13 2010/01/22 13:03:43 2010/01/22 13:03:43