![background image](http://html.mh-extra.com/html/panasonic/bb-hcm331/bb-hcm331_operating-instructions-manual_277318050.webp)
Operating Instructions
50
Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is
authenticated and encrypted. A new IP header is added (protecting the entire
original packet). Both VPN clients and VPN gateways can use this mode.
Note
The camera can be accessed only from the PCs under the VPN router. Other
PCs cannot access the camera.
Prepare the following requirements.
ItemSupported Feature
PC
Operating System
Web Browser
: Windows XP, Windows 2000, Windows
Me, Windows 98SE (in IPv4)
: Windows XP Service Pack 1 (in IPv6)
: Internet Explorer 6.0 or later
Router
ISP Service
(in IPv4)
ISP Service
(in IPv6)
: Static global address service (A global
address must be set up to the WAN side of
the router.)
: "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4
Tunneling" service
Note
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/
for
the recommended router.
Camera
ISP Service
(in IPv4)
ISP Service
(in IPv6)
: Services for multiple global addresses (A
global address must be set up to the
camera.)
: "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4
Tunneling" service
Encrypted
Not Encrypted
Tunnel Mode
WAN
LAN