![background image](http://html.mh-extra.com/html/panasonic/bb-hcm331/bb-hcm331_operating-instructions-manual_277318015.webp)
Operating Instructions
15
[For assistance, please call: 1-800-272-7033]
Setting up the IPv6 Router, your PC, and the Camera
Setting up the IPv6 Router
Set up the router as you subscribe to the IPv6 service. If the access from WAN side
is disabled on the router, enable the TCP packets from WAN side in the packet
filtering. See the Panasonic Network Camera support website at
http://
panasonic.co.jp/pcc/products/en/netwkcam/
for information about the
recommeded routers.
Setting up your PC
1.
Click [Start]
[All Programs]
[Accessories]
[Command Prompt].
•
Command Prompt window is displayed.
2.
Enter "ipv6 install".
•
"Succeeded" is displayed.
Note
If Windows XP Service Pack 1 is not installed, "Succeeded" will not be
displayed. Install it on your PC.
3.
Enter "ipconfig".
•
If the IPv6 address is properly assigned to your PC, IPv6 address will be
displayed on the window.
Setting up the Camera
Usually, IPv6 address is automatically assigned. If you assign a static IPv6
address, see page 44. To access the camera in IPv6, you need to subscribe to the
domain name service such as Viewnetcam.com, and register the URL.
Confirming that You Can Access the Camera
Confirm that the image is properly displayed (see page 12).