Panasonic AWE300SP - COLOR CAMERA, Руководство по эксплуатации

Страница: 70 / 97

20 (E)
ENGLISH
R B
R B PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
AUTO/ATW
PAINTING
GAIN
$
White balance adjustment
Automatic adjustment (AWC: AWC A/AWC B)
O
Use the camera in the AWC mode if the lighting conditions at the shooting site will
remain unchanged.
O
When “AWC A” or “AWC B” has been selected for the white balance on the Colour
Set sub-menu (pages 31, 37), the colour temperature conditions of two locations can
be preset (stored in the memory) using A/B.
O
When the camera is to be used under the same conditions as those of the settings,
simply perform the adjustment once, and set the menu or RCU (RCB) switch to A or
B. After this, there is no need to perform the adjustment again.
O
When new settings are established, the previous settings will be erased from the
memory.
1
Select “AWC A” or “AWC B” for the
white balance.
2
Shoot a white subject (such as a white
wall or white handkerchief) to fill the
screen.
The size of the white subject must be
at least 10% of the screen, and it must
appear in the middle. Keep shiny
objects or very bright objects off the
screen.
3
The white balance can be set by
pressing the ITEM/AWC switch for at
least 2 seconds in the shooting
mode.
4
The white balance can be set when
the auto set switch is set to “AWC.”
The AUTO LED flashes while the
white balance is being set.
The AUTO LED goes off to indicate
the successful completion of the
setting, and it lights to indicate a failed
setting procedure. Repeat the setting
procedure in the latter case.
When performing the adjustment
using the RCU (RCB)
When performing the adjustment
using the camera
The white area size must fill at least
10% of the screen.
Camera
–
+
MENU
ITEM/AWC
YES/ABC
NO/BAR
OPTION CARD
VIDEO OUT
I/F REMOTE
G/L IN
IRIS
DC12V IN
ITEM/AWC switch
RCU (RCB)
Auto set switch
AUTO LED